G-SMTP Plugin

G-SMTP is a next Generation SMTP-plugin built to last. This is a plugin that helps you send your e-mails via SMTP, and only that.

All the SMTP-details are setup as constants via wp-config.php, making it stable and does not have to rely on the database for the e-mails to be delivered.

1. Install the plugin either through your web browser in the WordPress admin panel or manually through SFTP/FTP.
2. Activate the plugin
3. Setup the constants in wp-config.php as described below or use the configuration page at Settings > G-SMTP > Config to generate them
4. Test the settings by going to Settings > G-SMTP and sending a test e-mail

Constants

These are the base constants needed to make the plugin work:

define( 'G_SMTP_ENABLED', true ); define( 'G_SMTP_HOST', 'my-smtp-host.com' ); define( 'G_SMTP_PORT', 25 ); 

Below, you will find information regarding the different constants available:

Activated/deactivated (mandatory)
This sets if the SMTP-connection should be enabled or not. It can be used for debugging-purposes and should be left as true generally.

define( 'G_SMTP_ENABLED', true ); 

Host (mandatory)
Here you enter which domain/IP-address where the SMTP-service is hosted.

define( 'G_SMTP_HOST', 'my-smtp-host.com' ); 

Port (mandatory)
Here you enter what port the SMTP-service is hosted on. Generally the ports 25 (non encrypted), 465 (SSL) and 587 (TLS) are used.

define( 'G_SMTP_PORT', 25 ); 

Encryption (optional)
This defines if an encrypted connection should be used when connecting to the SMTP-service. Normally you should enter ssl if the port is 465, tls if the port is 587 and leave it empty if the port is 25.

// TLS connections (port 587) define( 'G_SMTP_ENCRYPTION', 'tls' ); // SSL connections (port 465) define( 'G_SMTP_ENCRYPTION', 'ssl' ); 

Username and password (optional)
If the SMTP-service requires authentication then you must enter username and password.

define( 'G_SMTP_USER', 'username' ); define( 'G_SMTP_PASSWORD', 'password123' ); 

Sender, name and e-mail (optional)
If you want to override the sender name and e-mail address you can enter these settings.

define( 'G_SMTP_FROM_NAME', 'Sender name' ); define( 'G_SMTP_FROM_ADDRESS', '[email protected]' ); 

This overrides the default settings, if plugins have other settings then those will be used.

If you want name and e-mail address to always be overriden then you can use this setting:

define( 'G_SMTP_FORCE_FROM', true ); 

1. 

   Overview of settings page where you can verify the connection

2. 

   Configuration page where you can generate constants to put in your wp-config.php

1.1.2

• Tested with WordPress 6.0.

1.1.1

• Change to G_SMTP_USER from G_SMTP_USERNAME when generating config through the wizard

1.1.0

• Added ability to generate config for wp-config.php on the setting page.

1.0.0

• Initial release.